Tamiya F-4EJ model kit in 1/32 scale
The F-4EJ was a version of the famous McDonnell Douglas F-4E developed for the Nihon Koku Jieitai (Japanese Air Self Defense Force, or JASDF). The order came end 1968 and with some aircraft first build in the USA bij McDonnell, the first Japanese assembled and build Mitsubishi plane flew in May 1972. A total of 140 planes were delivered with the final plane coming of the assembly line May 1981. Also some additional RF/4EJ reconn planes were build which were unarmed.
The F-4EJ was developed for the air defense role only with several systems of the F-4E not being installed. The F-4EJ has common with the F-4E the Westinghouse AN/APQ-120 radar fire control system, the 20-mm M61A1 cannon with 640 rounds, plus AIM-7 and AIM-9 air-to-air missile capability as it has the air defence role. It however also got some Japanese internal systems and externally.
The F-4EJ first entered service with the JASDF in August of 1972. In the JASDF, six interceptor squadrons (hikotai) have operated the F-4EJ. These were the 301st, 302nd, 303rd, 304th, 305th, and 306th. The RF-4EJ was operated by the 501st Hikotai.
During the service life some updates and modifications were made, like the refuelling receptacle and ability to carry conventional bombs. Since the mid 1980?s a `Kai` update program was started, updating the various F-4EJ planes of the JASDF. The Kai has another radarnose and different cockpit panel layout.
November 2020 the F-4EJ Phantom went out of service at the JASDF, a few aircraft are kept for weapon test purposes.
For more information, check out the references below...
Wing leading edge devices are by aerodynamicists called leading edge flaps when they only can be tilted downwards. They are called a "slat" where there is a noticeable gap between the device and the wing that helps the airflow to create more wing lift.
There are also extendable slats that also move forward significantly, creating an even bigger lift (at however the cost of a more complex and heavier system). These were also used on some F-4 variants and can be recognized as they have actuator/hinge fairings on the lower wing surfaces at the leading edge.
Back to the
Normally these devices are in the clean neutral position (so not deployed) on the ground. (also noticeable are the plain trailing edge flap and outboard aileron).
Also, sometimes a "slot" is mentioned. This is in fact in case of the leading edge, a situation of a slat that can NOT move and is in fixed position.
On the F-4, horizontal stabilizers could be seen both with or without such a stabilizer slot; the device is fixed "inverted" in order to guide the air flow at extreme angles of attack and are more aerodynamically effective.
The F-4EJ are mostly seen with horizontal stabilizers that DO have the inverted leading edge fixed slot. (probably at first delivery, they had non-slotted stabilizers, new slotted ones being refitted later during the F-4EJ service careers).
This basically means that the Tamiya F-4EJ wing of the kit is correct but I suggest o just fill the inscribed inboard flap panellines. To show more clearly the mid-wing leading edge flap, a small saw cut can also made.
kit from Japan of the Phantom as used by the Japan Air Self Defense Force
(JSADF) F-4EJ is an excellent kit in 1/32 scale. Tamiya issued quite a
number of F-4 kits, with a F-4C/D appearing in 1995 and this F-4EJ kit
(#60314) issued in 2004.
This building report will show what can be done with the F-4EJ kit, what can be improved and how to do the construction. The kit's instructions are of the usual high standard by Tamya. However, the order of construction is changed to improve the kit in many areas. Just follow the step by step approach set out here. But let's look first at what is in the kit and what you get....
On to next
[ Page 2...]
Watch some videos on YouTube:
|Have a look at a Fujimi 1/72 F-4EJ model....|
(c) Copyright "designer"/ All rights reserved. Your comments are welcomed by webmaster
Created this page June 23, 2007
Updated links April 2013