BAC Lightning F2A

Echelon model in 1/32 scale made by Meindert de Vreeze
This is a vacuform model that is excellent. The kit was developed by mr. Frank Brown from the U.K. who I was able to meet at the IPMS UK Nationals at Donnington a long time ago. 

The kit includes fine plastic sheet parts and white metal parts. Various versions of the Lightning supersonic interceptor of the RAF can be made. 

The vacuform kit is a real achievement in what can be done through vacuforming and details parts from brass/metal. The kit is beautifully engineered and today, at 2005, is very rare as it is out of production for quite some years now. 

UPDATED NOTE: 2009 Trumpeter of China issued an injection moulded 1/32 kit of the Lightning. It needs some shape corrections however such as on the canopy and sill shape.

The Echelon model will be built to represent a F2A of RAF 92 Squadron King Cobras at Gutersloh, 1971. See also WIKI Info

Have a look at the Whirlybits 1/32 T5 conversion set here...

An overview of what you get in the Echelon kit: 

very large decal sheet !over 1 feet wide!

below... click on thumbnails as desired....



and a very comprehensive set of instructions and drawings

Some parts are seen here (note: some have already been prepared and removed from the backing sheet)


Vacuform parts & metal parts


The model was built using the usual vacu form techniques. Fit was very good and metal parts were very welcome indeed. You need to study the instructions very carefully as the kit enables you to make different Lightning variants.

This upper view shows the nice metal finish applied. This was done through a mix of spraying Testor Metal coat in various colours, applying coats on Johnson Clear varnish, polishing the coats and doing the details with bare metal foil (nose ring) and just plain Humbrol metal coat for strips and fastener detail. 

The cockpit section was obviously detailed on this large scale. Seat is provided as metal casting by Echelon and detailed with tape, strip and painting it results in a nice representation. 

Wing walkways are provided with this excellent kit as decals and the blue coat on the top fairing was sprayed on. This was done before applying the metal coats as to avoid masking on very sensitive metal coats.


The tail area with metal exhaust rings added as provided with the kit.

a view from above of the tail section. Note the angle of the tail plane. Note the drilled details with vents etcetera.


This shows the exhausts that are as the engines stacked giving the Lighting a high but not so with fuselage cross section..
Provided by Echelon kit as metal casting.

The cockpit with the instrument panel, with most details provided by the Echelon kit.

...the cockpit with view of refuelling probe on the left wing. 

This shows the cockpit with Martin Baker mk.5 seat. The nose with bare metal foil on the intake lip. 

the wheel bays with doors with inner details.

a nice frontal view... (Fr)l..ightening?

The model of a F2A of RAF 92 Squadron King Cobras at Gutersloh, 1971

The model took first prize in the vacuform category at the IPMS Nationals Contest, The Netherlands in 1997

Best references
Watch You Tube Video's on the BAC Lightning:
YouTube Video 1 
YouTube Video 2
YouTube Video 3 (Walk around)

- BAC Lightning, Aircraft illustrated special, Braybrook


Back to 1/32 Scale models....
3KB back to home
(c) Copyright Meindert "designer"/ All rights reserved. Your comments are welcomed by  webmaster

Created November 25, 2000